essay代写,代写assignment,paper代写,代写留学作业,英国作业

导航切换

QQ:
153688106

二维码

当前位置:主页 > essay代写 > 代写英国essay >

代写英国essay:时间管理论文-

浏览: 日期:2020-01-13

英国时间管理论文-Personal Goal Setting-Planning to Live Your Life Your Way(硕士论文片段二)由英国代写中心提供 How to Use Tool: Goal setting is a formal process for personal planning. By setting goals on a routine basis you decide what you want to achieve, and then step-by-step move towards the achievement of these goals. The process of setting goals and targets allows you to choose where you want to go in life. By knowing precisely what you want to achieve, you know what you have to concentrate on to do it. You also know what is merely a distraction. Goal setting is a standard technique used by top-level athletes, business-people and achievers in all fields. It gives you long-term vision and short-term motivation. It focuses your acquisition of knowledge and helps you to organize your resources.
By setting sharp, clearly defined goals, you can measure and take pride in the achievement of those goals. You can see forward progress in what might previously have seemed a long pointless grind. By setting goals, you will also raise your self-confidence, as you recognize your ability and competence in achieving the goals that you have set. The process of achieving goals and seeing this achievement gives you confidence that you will be able to achieve higher and more difficult goals. Goals are set on a number of different levels: firstly you decide what you want to do with your life and what large-scale goals you want to achieve. Then you break these down into the smaller and smaller targets that you must hit so that you reach your lifetime goals. Finally, once you have your plan, you start working towards achieving it. Starting to Set Personal Goals This section explains how to set personal goals. It starts with your lifetime goals, and then works through a series of lower level plans culminating in a daily to-do list. By setting up this structure of plans you can break even the biggest life goal down into a number of small tasks that you need to do each day to reach the lifetime goals. Your Lifetime Goals
The first step in setting personal goals is to consider what you want to achieve in your lifetime - setting Lifetime goals gives you the overall perspective that shapes all other aspects of your decision making. To give a broad, balanced coverage of all important areas in your life, try to set goals in some or all of the following categories: 8 • Artistic: Do you want to achieve any artistic goals? If so, what? • Attitude: Is any part of your mindset holding you back? Is there any part of the way that you behave that upsets you? If so, set goals to improve or cure the problem. • 英国论文代写Career: What level do you want to reach in your career? • Education: Is there any knowledge you want to acquire in particular? What information and skills will you need to achieve other goals? • Family:
Do you want to be a parent? If so, how are you going to be a good parent? How do you want to be seen by a partner or by members of your extended family? • Financial: How much do you want to earn by what stage? • Physical: Are there any athletic goals you want to achieve, or do you want good health deep into old age? What steps are you going to take to achieve this? • Pleasure: How do you want to enjoy yourself? - you should ensure that some of your life is for you! • Public Service: Do you want to make the world a better place by your existence? If so, how? Once you have decided your goals in these categories, assign a priority to them from A to F. Then review the goals and re-prioritize until you are satisfied that they reflect the shape of the life that you want to lead. Also ensure that the goals that you have set are the goals that you want to achieve, not what your parents, spouse, family, or employers want them to be. How to Start to Achieve Your Lifetime Goals Once you have set your lifetime goals, set a 25 year plan of smaller goals that you should complete if you are to reach your lifetime plan. Then set a 5 year plan, 1 year plan, 6 month plan, and 1 month plan of progressively smaller goals that you should reach to achieve your lifetime goals. Each of these should be based on the previous plan.
9 Finally set a daily to-do list of things that you should do today to work towards your lifetime goals. At an early stage these goals may be to read books and gather information on the achievement of your goals. This will help you to improve the quality and realism of your goal-setting. Finally review your plans, and make sure that they fit the way in which you want to live your life. Staying on Course Once you have decided your first set of plans, keep the process going by reviewing and updating your to-do list on a daily basis. Periodically review the longer term plans, and modify them to reflect your changing priorities and experience. An easy way of doing this is to use the goal-setting software like GoalPro5 (www.goalpro.com) on a daily basis - we review GoalPro on the left-hand sidebar, alternatively you can download GoalPro from Success Studios web site. GoalPro uses a similar set of categories to ones we recommend - either use theirs, or adapt the software to use ours. Setting Goals Effectively The following broad guidelines will help you to set effective goals: • State each goal as a positive statement: (positive) express your goals positively - 'Execute this technique well' is a much better goal than 'don't make this stupid mistake' • Be precise: set a precise goal, putting in dates, times and amounts so that you can measure achievement. If you do this, you will know exactly when you have achieved the goal, and can take complete satisfaction from having achieved it. • Set priorities:
where you have several goals, give each a priority. This helps you to avoid feeling overwhelmed by too many goals, and helps to direct your attention to the most important ones. • Write goals down: (prescription) this crystallizes them and gives them more force. • Keep operational goals small: (make progress) keep the low-level goals you are working towards small and achievable. If a goal is too large, then it can seem that you are not making progress towards it. Keeping goals small and incremental gives more opportunities for reward. Derive today's goals from larger ones. 10 • Set performance goals, not outcome goals: you should take care to set goals over which you have as much control as possible. There is nothing more dispiriting than failing to achieve a personal goal for reasons beyond your control. These could be bad business environments, poor judging, bad weather, injury, or just plain bad luck. If you base your goals on personal performance, then you can keep control over the achievement of your goals and draw satisfaction from them. • Set realistic goals: (pragmatic) it is important to set goals that you can achieve. All sorts of people (parents, media, society) can set unrealistic goals for you. They will often do this in ignorance of your own desires and ambitions. Alternatively you may be naïve in setting very high goals. You might not appreciate either the obstacles in the way, or understand quite how many skills you must master to achieve a particular level of performance.
• Do not set goals too low: just as it is important not to set goals unrealistically high, do not set them too low. People tend to do this where they are afraid of failure or where they are lazy! You should set goals so that they are slightly out of your immediate grasp, but not so far that there is no hope of achieving them. No-one will put serious effort into achieving a goal that they believe is unrealistic. However, remember that your belief that a goal is unrealistic may be incorrect. If this could be the case, you can to change this belief by using imagery effectively. Achieving Goals When you have achieved a goal, take the time to enjoy the satisfaction of having done so. Absorb the implications of the goal achievement, and observe the progress you have made towards other goals. If the goal was a significant one, reward yourself appropriately. With the experience of having achieved this goal, review the rest of your goal plans: • If you achieved the goal too easily, make your next goals harder • If the goal took a dispiriting length of time to achieve, make the next goals a little easier • If you learned something that would lead you to change other goals, do so • If while achieving the goal you noticed a deficit in your skills, decide whether to set goals to fix this. Failure to meet goals does not matter as long as you learn from it. Feed lessons learned back into your goal-setting program.
11 Remember too that your goals will change as you mature - adjust them regularly to reflect this growth in your personality. If goals do not hold any attraction any longer, then let them go. Goal-setting is your servant, not your master - it should bring you real pleasure, satisfaction and a sense of achievement. Example: The best example of goal-setting that you can have is to try setting your own goals. Set aside two hours to think through your lifetime goals in each of the categories. Then work back through the 25 year plan, 5 year plan, 1 year plan, 6 month plan, a 1 month plan. Finally draw up a To Do list of jobs to do tomorrow to move towards your goals. Tomorrow, do those jobs, and start to use goal-setting routinely! Key points: Goal setting is an important method of: • Deciding what is important for you to achieve in your life • Separating what is important from what is irrelevant • Motivating yourself to achievement • Building your self-confidence based on measured achievement of goals You should allow yourself to enjoy the achievement of goals and reward yourself appropriately. Draw lessons where appropriate, and feed these back into future performance. If you do not already set goals now is a great time to start! End of Section 1
12 Creativity Tools This section of Mind Tools explains a wide range of techniques you can use to come up with creative and imaginative solutions to the challenges you face. The section starts by showing you how to use three systematic approaches to creativity. It then discusses some important lateral-thinking based approaches, which can be used to come up with startling and original solutions to problems. Finally it explains how to use two powerful and important problem-solving processes. While you are reading these articles, have a look at the creativity book reviews, resources and stores on the sidebars - these can help you to develop your creativity skills further. Introduction Reversal - Improving Products and Services SCAMPER - Generating new products and services Attribute Listing, Morphological & Matrix Analysis - Creating new products, services & strategies Brainstorming - Generating many radical ideas Reframing Matrix - Looking with different perspectives Concept Fan - Widening the search for solutions Random Input - Making creative leaps Provocation - Carrying out thought experiments DO IT - A simple process for creativity Simplex - A powerful problem-solving process An Introduction Creativity Tools
The tools in this section can help you to become more creative. They are designed to help you devise creative and imaginative solutions to problems, and help you to spot opportunities that you might otherwise miss. The section describes the following techniques: • Improving a product or service - Reversal and SCAMPER • Creating new products, services & strategies: - Attribute Listing, Morphological Analysis & Matrix Analysis • Generating many radical ideas - Brainstorming • Making creative leaps - Random Input 13 • Widening the search for solutions - Concept Fan • Looking at problems from different perspectives - Reframing Matrix • Carrying out thought experiments - Provocation • A simple process for creativity - DO IT • A powerful integrated problem solving process - Simplex • Subconscious problem solving Before you continue, it is important to understand what we mean by creativity - there are two completely distinct types. The first is technical creativity, where people create new theories, technologies or ideas. This is the type of creativity we discuss here. The second is artistic creativity, which is more born of skill, technique and self-expression. Artistic creativity is beyond the scope of these articles.
Many of the techniques in this chapter have been used by great thinkers to drive their creativity. Albert Einstein, for example, used his own informal variant of Provocation to trigger ideas that lead to the Theory of Relativity. Approaches to Creativity There are two main strands to technical creativity - structured thinking and lateral thinking. Structured thinking relies on logical or structured ways of creating a new product or service. Examples of this approach are Morphological Analysis and the Reframing Matrix. The other main strand uses 'Lateral Thinking'. Examples of this are Brainstorming, Random Input and Provocation. Lateral Thinking has been developed and popularized by Edward de Bono, whose books you can find in the appropriate articles. Structured Thinking & Lateral Thinking Lateral thinking recognizes that our brains are pattern recognition systems - they do not function like computers. It takes years of training before we learn to do simple arithmetic - something that computers do very easily. On the other hand, we can instantly recognize patterns such as faces, language, and handwriting. The only computers that begin to be able to do these things do it by modeling the way that human brain cells work . Even then, computers will need to become more powerful before they approach our ability to handle patterns. The benefit of good pattern recognition is that we can recognize objects and situations very quickly. Imagine how much time would be wasted if you had to do a full analysis every time you came across a cylindrical canister of effervescent fluid. Most people would just open their can of fizzy drink. Without pattern recognition we would starve or be eaten. We could not cross the road safely.
14 Unfortunately we get stuck in our patterns. We tend to think within them - solutions we develop are based on previous solutions to similar problems. Normally it does not occur to us to use solutions belonging to other patterns. We use lateral thinking techniques to break out of this patterned way of thinking. Lateral thinking techniques help us to come up with startling, brilliant and original solutions to problems and opportunities. It is important to point out that each type of approach has its strength. Logical, disciplined thinking is enormously effective in making products and services better. It can, however, only go so far before all practical improvements have been carried out. Lateral thinking can generate completely new concepts and ideas, and brilliant improvements to existing systems. In the wrong place, however, it can be sterile or unnecessarily disruptive. Taking the best of each... A number of techniques fuse the strengths of the two different strands of creativity. Techniques such as the Concept Fan use a combination of structured and lateral thinking. DO IT and Min Basadur's Simplex embed the two approaches within problem solving processes. While these would 'overkill' on minor problems, they provide excellent frameworks for solving difficult and serious ones. The Creative Frame of Mind
Often the only difference between creative and uncreative people is self-perception. Creative people see themselves as creative and give themselves the freedom to create. Uncreative people do not think about creativity and do not give themselves the opportunity to create anything new. Being creative may just be a matter of giving yourself the time to take a step back and allow yourself to ask yourself if there is a better way of doing something. Edward de Bono calls this a 'Creative Pause'. He suggests that this should be a short break of maybe only 30 seconds, but that this should be a habitual part of thinking. This needs self-discipline, as it is easy to forget. Another important attitude-shift is to view problems as opportunities for improvement. While this is something of a cliché, it is true. Whenever you solve a problem, you have a better product or service to offer afterwards. Using Creativity Creativity is sterile if action does not follow from it. Ideas must be evaluated, improved, polished and marketed before they have any value. Other sections of Mind Tools lay out the evaluation, analysis and
15 planning tools needed to do this. They also explain the time and stress management techniques you will need when your creative ideas take off. Have fun creating! Reversal Improving Products and Services How to use tool: Reversal is a good tool for improving a product or a service. To use it, ask the opposite of the question you want to ask, and apply the results. Example: Imagine that you want to improve the response of a service center. Using Reversal you would ask 'How would I reduce customer satisfaction?'. Answering this question you might give the following answers: • Not answering the phone when customers call • Not returning phone calls • Have people with no product knowledge answering the phone • Use rude staff • Give the wrong advice • Etc. After using Reversal, you would ensure that staff were handling incoming phone calls efficiently and pleasantly. You would set up training programs to ensure that they were giving accurate and effective advice. Key Points: Reversal is a good, easy process for improving products and services. You use it by asking the exact opposite of the question you want answered, and then apply the results appropriately. SCAMPER A tool for generating new products and services How to use tool: SCAMPER is a check list that helps you to think of changes you can make to an existing product to create a new one. You can use these changes either as direct suggestions or as starting points for lateral thinking. The changes SCAMPER stands for are: • S - Substitute - components, materials, people 16 • C - Combine - mix, combine with other assemblies or services, integrate • A - Adapt - alter, change function, use part of another element • M - Modify - increase or reduce in scale, change shape, modifyattributes (e.g. colour) • P - Put to another use • E - Eliminate - remove elements, simplify, reduce to core functionality • R - Reverse - turn inside out or upside down, also use of Reversal. Example: As an example, imagine that you are a manufacturer of nuts and bolts, and you were looking for new products. SCAMPER would give you: • Substitute - use of high tech materials for niche markets - high speed steel? Carbon fibre? Plastics? Glass? Non-reactive material? • Combine - integrate nut and bolt? Bolt and washer? Bolt and spanner? • Adapt - put Allen key or Star head on bolt? Countersink head? • Modify - produce bolts for watches or bridges? Produce different shaped bolts (e.g. screw in plugs)? Pre-painted green bolts? • Put to another use - bolts as hinge pins? As axles? • Eliminate - Eliminate nuts, washers, heads, thread, etc. • Reverse - make dies as well as bolts, make bolts that cut threads for themselves in material, etc. Using SCAMPER here may have helped you identify possible new products. Many of the ideas may be impractical or may not suit the equipment used by the manufacturer. However some ideas could be good starting points for new products. SCAMPER was created by Michael Mikalko in his book book Thinkertoys. Key points: SCAMPER is an acronym for Substitute, Combine, Adapt, Modify, Put to another use, Eliminate, Reverse. This is a list of changes that you could make to existing products and services to open up new opportunities. 17 Attribute Listing, Morphological Analysis & Matrix Analysis Tools for creating new products & services Attribute Listing, Morphological Analysis and Matrix Analysis are good techniques for finding new combinations of products or services. They are sufficiently similar to be discussed together. We use Attribute Listing and Morphological Analysis to generate new products and services. How to use tools: To use the techniques, firstly list the attributes of the product, service or strategy you are examining. Attributes are parts, properties, qualities or design elements of the thing being looked at. For example, attributes of a pencil would be shaft material, lead material, hardness of lead, width of lead, quality, color, weight, price, etc. A television plot would have attributes of characters, actions, locations, weather, etc. For a marketing strategy you might use attributes of markets open to you, uses of the product, skills you have available, etc. Draw up a table using these attributes as column headings. Within the columns write down as many variations of the attribute as possible. This might be an exercise that benefits from Brainstorming. The table should now show all possible variations of each attribute. Now select one entry from each column. Either do this randomly or select interesting combinations. By mixing one item from each column, you will create a new mixture of components - this is a new product, service or strategy. Finally, evaluate and improve that mixture to see if you can imagine a profitable market for it. Example: Imagine that you want to create a new lamp. The starting point for this might be to carry out a morphological analysis. Properties of a lamp might be power supply, bulb type, light intensity, size, style, finish, material, shade, etc. You can set these out as column headings on a table, and then brainstorm variations: Power Supply Bulb Type Light Intensity Size Style Finish Material Battery Halogen Low Very Large Modern Black Metal Mains Bulb Medium Large Antique White Ceramic Solar Daylight High Medium Roman Metallic Concrete Generator Colored Variable Small Art Nouveau Terracotta Bone Crank Hand held Industrial Enamel Glass 18 Gas Ethnic Natural Wood Oil/Petrol Fabric Stone Flame Plastic Interesting combinations might be: • Solar powered/battery, medium intensity, daylight bulb - possibly used in clothes shops to allow customers to see the true color of clothes. • Large hand cranked arc lights - used in developing countries, or far from a mains power supply • A ceramic oil lamp in Roman style - used in themed restaurants, resurrecting the olive oil lamps of 2000 years ago • A normal table lamp designed to be painted, wallpapered or covered in fabric so that it matches the style of a room perfectly Some of these might be practical, novel ideas for the lighting manufacturer. Some might not. This is where the manufacturer's experience and market knowledge are important. Key points: Morphological Analysis, Matrix Analysis and Attribute Listing are useful techniques for making new combinations of products, services and strategies. You use the tools by identifying the attributes of the product, service or strategy you are examining. Attributes might be components, , dimensions, color, weight, style, speed of service, skills assemblies available, etc. Use these attributes as column headings. Underneath the column headings list as many variations of that attribute as you can. You can now use the table by randomly selecting one item from each column, or by selecting interesting combinations of items. This will give you ideas that you can examine for practicality. Notes: • Attribute Listing focuses on the attributes of an object, seeing how each attribute could be improved. • Morphological Analysis uses the same basic technique, but is used to create a new product by mixing components in a new way. • Matrix Analysis focuses on businesses. It is used to generate new approaches, using attributes such as market sectors, customer needs, products, promotional methods, etc. 19 Brainstorming Generating many radical ideas How to use tool: Brainstorming is an excellent way of developing many creative solutions to a problem. It works by focusing on a problem, and then coming up with very many radical solutions to it. Ideas should deliberately be as broad and odd as possible, and should be developed as fast as possible. Brainstorming is a lateral thinking process (see the introduction to this chapter for further information) - it is designed to help you break out of your thinking patterns into new ways of looking at things. During brainstorming sessions there should be no criticism of ideas - you are trying to open possibilities and break down wrong assumptions about the limits of the problem. Judgment and analysis at this stage will stunt idea generation. Ideas should only be evaluated once the brainstorming session has finished - you can then explore solutions further using conventional approaches. If your ideas begin to dry up, you can 'seed' the session with, for example, a random word (see Random Input). Individual Brainstorming When you brainstorm on your own you will tend to produce a wider range of ideas than with group brainstorming - you do not have to worry about other people's egos or opinions, and can therefore be more freely creative. You may not, however, develop ideas as effectively as you do not have the experience of a group to help you. When Brainstorming on your own, it can be helpful to use Mind Maps to lay out and develop ideas. Group Brainstorming Group brainstorming can be very effective as it uses the experience and creativity of all members of the group. When individual members reach their limit on an idea, another member's creativity and experience can take the idea to the next stage. Group brainstorming therefore tends to develop ideas in more depth than individual brainstorming. Brainstorming in a group can be risky for individuals. Valuable but strange suggestions may appear stupid at first sight. You therefore need to chair sessions tightly so that uncreative peop1le do not crush these ideas and leave group members feeling humiliated. To run a group brainstorming session effectively, do the following: 20 • Define the problem you want solved clearly, and lay out any criteria to be met. • Keep the session focused on the problem • Ensure that no-one criticizes or evaluates ideas during the session. Criticism introduces an element of risk for group members when putting forward an idea. This stifles creativity and cripples the free running nature of a good brainstorming session. • Encourage an enthusiastic, uncritical attitude among members of the group. Try to get everyone to contribute and develop ideas, including the quietest members of the group • Let people have fun brainstorming. Encourage them to come up with as many ideas as possible, from solidly practical ones to wildly impractical ones. Welcome creativity. • Ensure that no train of thought is followed for too long • Encourage people to develop other people's ideas, or to use other ideas to create new ones • Appoint one person to note down ideas that come out of the session. A good way of doing this is to use a flip chart. This should be studied and evaluated after the session. Where possible, participants in the brainstorming process should come from as wide a range of disciplines as possible. This brings a broad range of experience to the session and helps to make it more creative. Key points: Brainstorming is a way of generating radical ideas. During the brainstorming process there is no criticism of ideas - free rein is given to people's creativity. Criticism and judgment cramp creativity. Individual brainstorming is best for generating many ideas, but tends to be less effective at developing them. Group brainstorming tends to develop fewer ideas, but takes each idea further. Group brainstorming needs formal rules for it to work smoothly. Reframing Matrix Looking at problems with a different perspective How to use tool: A Reframing Matrix is a simple technique that helps you to look at business problems from a number of different viewpoints. It expands the range of creative solutions that you can generate. The approach relies on the fact that different people with different experience approach problems in different ways. What this technique 21 helps you to do is to put yourself into the minds of different people and imagine the solutions they would come up with. We do this by putting the question to be asked in the middle of a grid. We use boxes around the grid for the different perspectives. This is just an easy way of laying the problem out - if it does not suit you, change it. We will look at two different approaches to the reframing matrix - you could, however, use this approach in many different ways. The 4 Ps Approach This relies on looking at a problem from different perspectives within a business. The 4 Ps approach looks at problems from the following viewpoints: • Product perspective: is there something wrong with the product? • Planning perspective: are our business or marketing plans at fault? • Potential perspective: if we were to seriously increase our targets, how would we achieve these increases? • People perspective: why do people choose one product over another? An example of this approach is shown below: The 'Professions Approach' Another approach to using a reframing matrix is to look at the problem from the viewpoints of different specialists. The way, for example, that a 22 doctor looks at a problem would be different from the approach a civil engineer would use. This would be different from a sales manager's perspective. Key points: The Reframing Matrix is a formal technique used to look at problems from different perspectives. It helps to expand the number of options open to you for solving a problem. You draw up a reframing matrix by posing a question in a box in the middle of a piece of paper. You then draw a grid around it. Each cell will contain approaches to the problem, seen from one perspective. One way of using the technique is the '4 Ps' approach. This looks at the problem from the following viewpoints: Product, Planning, Potential and People. Another set of perspectives is to ask yourself how different professionals would approach the problem. Useful professions to consider would be medical doctors, engineers, systems analysts, sales managers, etc. Concept Fan Widening the Search for Solutions How to use tool: The Concept Fan is a way of finding different approaches to a problem when you have rejected all obvious solutions. It develops the principle of 'taking one step back' to get a broader perspective. To start a Concept Fan, draw a circle in the middle of a large piece of paper. Write the problem you are trying to solve into it. To the right of it radiate lines representing possible solutions to the problem. This is shown in Figure 1. It may be that the ideas you have are impractical or do not really solve the problem. If this is the case, take a 'step back' for a broader view of the problem. Do this by drawing a circle to the left of the first circle, and write the broader definition into this new circle. Link it with an arrow to show that it comes from the first circle (see Figure 2). Use this as a starting point to radiate out other ideas (Figure 3). If this does not give you enough new ideas, you can take yet another step back (and another, and another…) (Figure 4). 23 24 25 The idea of the Concept Fan was devised by Edward de Bono in his book Serious Creativity - this is one of the books reviewed on right-hand side of this page. The book shows how to use many similar tools. 26 Key points: The Concept Fan is a useful technique for widening the search for solutions when you have rejected all obvious approaches. It gives you a clear framework within which you can take 'one step back' to get a broader view of a problem. To start a concept fan, write the problem in the middle of a piece of paper. Write possible solutions to this problem on lines radiating from this circle. If no idea is good enough, redefine the problem more broadly. Write this broader definition in a circle to the left of the first one. Draw an arrow from the initial problem definition to the new one to show the linkage between the problems. Then radiate possible solutions from this broader definition. Keep on expanding and redefining the problem until you have a useful solution. Random Input Making Creative Leaps Random Input is a lateral thinking tool. It is very useful when you need fresh ideas or new perspectives during problem solving. As explained in the introduction to this chapter, we tend to think by recognizing patterns. We react to these patterns based on past experience and extensions to that experience. Sometimes, though, we get stuck inside them - within a particular pattern there may be no good solution to a particular sort of problem. Random input is a technique for linking another thinking pattern into the one we are using. Along with this new pattern comes all the experience you have connected to it. How to use tool: To use Random Input, select a random noun from either a dictionary or a pre-prepared word list. It often helps if the noun is something that can be seen or touched (e.g. 'helicopter', 'dog') rather than a concept (e.g. 'fairness'). Use this noun as the starting point for brainstorming your problem. You may find that you get good insights if you select a word from a separate field in which you have some expertise. If you choose a good word, you will add a range of new ideas and concepts to your brainstorming. While some will be useless, hopefully you will gain some good new insights into your problem. If you persist, then at least one of these is likely to be a startling creative leap. 27 Example: Imagine that you are thinking about the problem of reducing car pollution. So far in thinking through the problem you have considered all the conventional solutions of catalytic conversion and clean fuels. Selecting a random noun from the titles of the books in a book case you might see the word 'Plants'. Brainstorming from this you could generate a number of new ideas: • Plant trees on the side of roads to convert CO2 back into oxygen • Similarly, pass exhaust gases through a soup of algae to convert CO2 back into oxygen. Perhaps this is how an 'air scrubber' in a space craft works? • Put sulfur-metabolizing bacteria into an exhaust gas processor to clean up exhaust gases. Would nitrogen compounds fertilize these bacteria? • Another meaning of 'Plant' is factory. Perhaps exhaust gases could be collected in a container, and sent to a special plant to be cleaned? Perhaps you could offload these gases at the same time as you fill up with fuel? These ideas are very raw. Some may be wrong or impractical. One of them might be original and the basis of some useful development. Key points: Random input is an excellent way of getting new perspectives on a problem. It often leads to startling creative leaps. It provides an easy way of breaking out of restrictive thinking patterns. It helps you to link in whole ranges of new solutions that you would not otherwise associate with the problem. The best words to use are concrete nouns, which may come from areas in which you have some expertise. Nouns should not, however, come from the same field as the problem you are considering - the whole idea of Random Input is to link in new thinking patterns, not to stay inside old ones. Provocation Carrying Out Thought Experiments How to use tool: Provocation is an important lateral thinking technique. Just like Random Input, it works by moving your thinking out of the established patterns that you use to solve problems. As explained earlier, we think by recognizing patterns and reacting to them. These reactions come from our past experiences and logical 28 extensions to those experiences. Often we do not think outside these patterns. While we may know the answer as part of a different type of problem, the structure of our brains makes it difficult for us to link this in. Provocation is one of the tools we use to make links between these patterns. We use it by making deliberately stupid statements (Provocations), in which something we take for granted about the situation is not true. Statements need to be stupid to shock our minds out of existing ways of thinking. Once we have made a provocative statement, we then suspend judgment and use that statement to generate ideas. Provocations give us original starting points for creative thinking. As an example, we could make a statement that 'Houses should not have roofs'. Normally this would not be a good idea! However this leads one to think of houses with opening roofs, or houses with glass roofs. These would allow you to lie in bed and look up at the stars. Once you have made the Provocation, you can use it in a number of different ways, by examining: • the consequences of the statement • what the benefits would be • what special circumstances would make it a sensible solution • the principles needed to support it and make it work • how it would work moment-to-moment • what would happen if a sequence of events was changed • etc. You can use this list as a check list. Edward de Bono has developed and popularize use of Provocation by using the word 'Po'. 'Po' stands for 'Provocative operation'. As well as laying out how to use Provocation effectively, he suggests that when we make a Provocative statement in public the we label it as such with 'Po' (e.g. 'Po: the earth is flat'). This does rely on all members of your audience knowing about Provocation! Edward de Bono's book Serious Creativity explores this sort of technique in detail. As with other lateral thinking techniques, Provocation does not always produce good or relevant ideas. Often, though, it does. Ideas generated using Provocation are likely to be fresh and original. Example: The owner of a video-hire shop is looking at new ideas for business to compete with the Internet. She starts with the provocation 'Customers should not pay to borrow videos'. She then examines the provocation: 29 • Consequences: The shop would get no rental revenue and therefore would need alternative sources of cash. It would be cheaper to borrow the video from the shop than to download the film or order it from a catalogue. • Benefits: Many more people would come to borrow videos. More people would pass through the shop. The shop would spoil the market for other video shops in the area. • Circumstances: The shop would need other revenue. Perhaps the owner could sell advertising in the shop, or sell popcorn, sweets, bottles of wine or pizzas to people borrowing films. This would make her shop a one-stop 'Night at home' shop. Perhaps it would only lend videos to people who had absorbed a 30 second commercial, or completed a market research questionnaire. After using the Provocation, the owner of the video shop decides to run an experiment for several months. She will allow customers to borrow the top ten videos free (but naturally will fine them for late return). She puts the videos at the back of the shop. In front of them she places displays of bottles of wine, soft drinks, popcorn and sweets so that customers have to walk past them to get to the videos. Next to the film return counter she sells merchandise from the top ten films being hired. If the approach is a success she will open a pizza stand inside the shop. Key points: Provocation is an important lateral thinking technique that helps to generate original starting points for creative thinking. To use provocation, make a deliberately stupid comment relating to the problem you are thinking about. Then suspend judgment, and use the statement as the starting point for generating ideas. Often this approach will help you to generate completely new concepts. DO IT A Simple Process for Creativity How to use tool: DO IT is a process for creativity. Techniques earlier in this chapter focus on specific aspects of creative thinking. DO IT bundles them together, and introduces formal methods of problem definition and evaluation. These help you to get the best out of the creativity techniques. DO IT is an acronym that stands for: D - Define problem 30 O - Open mind and apply creative techniques I - Identify best solution T - Transform These stages are explained in more detail below: 1. Define Problem This section concentrates on analyzing the problem to ensure that the correct question is being asked. The following steps will help you to do this: • Check that you are tackling the problem, not the symptoms of the problem. To do this, ask yourself why the problem exists repeatedly until you get to the root of it. • Lay out the bounds of the problem. Work out the objectives that you must achieve and the constraints that you are operating under. • Where a problem appears to be very large, break it down into smaller parts. Keep on going until each part is achievable in its own right, or needs a precisely defined area of research to be carried out. See Drill-Down for a detailed description of this process. • Summarize the problem in as concise a form as possible. Robert W. Olsen suggests that the best way to do this is to write down a number of 2 word problem statements and choose the best one. 2. Open Mind and Apply Creative Techniques Once you know the problem that you want to solve, you are ready to start generating possible solutions. It is very tempting just to accept the first good idea that you come across. If you do this, you will miss many even better solutions. At this stage of DO IT we are not interested in evaluating ideas - we are trying to generate as many different ideas as possible. Even bad ideas may be the seeds of good ones. You can use the whole battery of creativity techniques covered earlier in this section to search for possible solutions. Each tool has its particular strengths and benefits, depending on the problems that you want to solve. While you are generating solutions, remember that other people will have different perspectives on the problem - it will almost certainly be worth asking for the opinions of your colleagues as part of this process. 3. Identify the Best Solution Only at this stage do you select the best of the ideas you have generated. It may be that the best idea is obvious. Alternatively, it may 31 be worth examining and developing a number of ideas in detail before you select one. The Decision Making Techniques section of Mind Tools explains a range of excellent decision making techniques. Decision Tree Analysis and Force Field Analysis are particularly useful. These will help you to choose between the solutions available to you. When you are selecting a solution, bear in mind your own or your organization's goals. Often decision-making becomes easy once you know these. 4. Transform Having identified the problem and created a solution to it, the final stage is to implement this solution. This involves not only development of a reliable product from your idea, but all the marketing and business side as well. This may take a great deal of time and energy. Many very creative people fail at this stage. They will have fun creating new products and services that may be years ahead of what is available on the market. They will then fail to develop them, and watch someone else make a fortune out of the idea several years later. The first stage in transforming an idea is to develop an Action Plan for the transformation. This may lead to creation of a Business or Marketing Plan. Once you have done this, the work of implementation begins! Key points: DO IT is a structured process for creativity. Using DO IT ensures that you carry out the essential groundwork that helps you to get the most out of creativity tools. These steps are: 1. Problem Definition: During this stage you apply a number of techniques to ensure that you are asking the right question. 2. Open Mind: Here you apply creativity techniques to generate as many answers as possible to the question you are asking. At this stage you are not evaluating the answers. 3. Identify the best solution: Only at this stage do you select the best solutions from the ones you came up with in step 2. Where you are having difficulty in selecting ideas, use formal techniques to help. 4. Transform: The final stage is to make an Action Plan for the implementation of the solution, and to carry it out. Without implementation, your creativity is sterile. 32 Simplex A Powerful Integrated Problem-Solving Process How to use tool: Simplex is an industrial-strength creativity tool. It takes the approach of DO IT to the next level of sophistication. Rather than seeing creativity as a single straight-line process, Simplex sees it as the continuous cycle it should be. Completion and implementation of one cycle of creativity leads straight into the next cycle of creative improvement. Simplex uses the following eight stages: These are explained below: 1. Problem finding Often finding the right problem to solve is the most difficult part of the creative process. When using Simplex, actively seek problems out - wherever they exist you have opportunities for change and improvement. Problems may be obvious, or can be flushed out using trigger questions like the ones below: • What would your customers want you to improve? • What could they be doing better if we could help them? • Who else could we help using our core competences? 33 • What small problems do we have which could grow into bigger ones? • What slows our work or makes it more difficult? What do we often fail to achieve? • How can we improve quality? • What are our competitors doing that we could do? • What is frustrating and irritating? These questions deal with problems that exist now. It is also useful to try to look into the future. Think about how you expect markets and customers to change over the next few years; the problems you may experience as your organization expands; and social, political and legal changes that may affect it. At this stage you may not have enough information to formulate your problem precisely. Do not worry about this until step 3! 2. Fact Finding The next stage is to find out as much information relating to the problem as possible. This gives you the depth of knowledge you need to: • Use the best ideas your competitors have had • Understand customers needs in more detail • Know what has already been tried • Fully understand any processes, components, services or technologies that you may need to use • Ensure that the benefits of solving the problem will be worth the effort you will put into it This stage also involves assessing the quality of the information that you have. Here it is worth listing your assumptions and checking that they are correct. 3. Problem definition By the time you reach this stage, you should know roughly what the problem is and should have a good understanding of the facts relating to it. From here the thing to do is to crystallize the exact problem or problems you want to solve. It is important to solve a problem at the right level. If you ask questions that are too broad, then you will never have enough resources to answer them effectively. If you ask questions that are too narrow, you may end up fixing symptoms of a problem, rather than the problem itself. Min Basadur (who created the Simplex Process) suggests using the question 'Why?' to broaden a question, and 'What's stopping you?' to narrow it. For example, if your problem is one of trees dying, ask 'Why do 34 I want to keep trees healthy?'. This might broaden the question to 'How can I maintain the quality of our environment?'. A 'What's stopping you?' here could be 'I do not know how to control a disease killing the tree'. Big problems are normally made up of many smaller ones. This is the stage at which you can use a technique like Drill-Down to break the problem down to its component parts. 4. Idea finding The next stage is to generate as many ideas as possible. Ways of doing this range from asking other people for their opinions, through programmed creativity tools and lateral thinking techniques to brainstorming. Do not evaluate ideas during this stage - concentrate on generating many ideas as possible. Bad ideas often trigger good ones. 5. Selection & Evaluation Once you have a number of possible solutions to your problem, it is time to select the best one. The best solution may be obvious. If it is not, then it is important to think through the criteria you will use to select the best idea. The Decision Making Techniques section of Mind Tools lays out a number of good methods for this. Particularly useful techniques may be Decision Trees, Paired Comparison Analysis and Grid Analysis. Once you have selected an idea, develop it as far as possible. It is then essential to evaluate it to see if it is good enough to be worth using. It is important not to let your ego get in the way of your common sense. If your idea does not give big enough benefit, then either see if you can generate more ideas, or restart the whole process. You can waste years of your life developing creative ideas that no-one wants. There are two excellent techniques for doing this. One is Edward de Bono's 6 Thinking Hats, which is an excellent tool for qualitative analysis. The other is Cost/Benefit Analysis, which gives you a good basis for financially based decisions. 6. Planning Once you have selected an idea, and are confident that your idea is worthwhile, this is the time to plan its implementation. The best way of doing this is to set this out as an Action Plan, which lays out the who, what, when, where, why and how of making it work. For large projects it may be worth using more formal planning techniques. 35 7. Sell Idea Up to this stage you may have done all this work on your own or with a small committee. Now you will have to sell the idea to the people who must support it. This might be your boss, a bank manager or other people involved with the project. In selling the project you will have to address not only the practicality of the project, but also things such internal politics, hidden fear of change, etc. 8. Action Finally, after all the creativity and preparation, comes action! This is where all the careful work and planning pays off. Once the action is firmly under way, return to stage 1, Problem Finding, to continue improving your idea. Min Basadur's book, The Power of Innovation, explores this process in much more detail - the book is reviewed on the right hand side bar. Key points: The Simplex Process is a powerful, sophisticated approach to innovation. It is suitable for projects and organizations of almost any scale. The Process is an eight stage cycle. On completion of the eight stages you start it again to find and solve another problem. This helps to ensure continuous improvement. Stages in the process are: 1. Problem finding 2. Fact finding 3. Problem Definition 4. Idea Finding 5. Selection and Evaluation 6. Planning 7. Selling of the Idea 8. Action By moving through these stages you ensure that you solve the most significant problems with the best solutions available to you. This process can help you to be intensely creative. End of Section 5 36